HPM series high-pressure foaming machine
is zhangjiagang strength and industrious Machinery Co. Ltd following the international latest high technology and according to word wide the PU industry that independent innovation high technology products .The main parts are import from foreign country, equipment technical and safely performance are reached the word wide advanced capacity. The equipment is widely used automobile industry, insulation industry, air conditioning industry, electric appliance industry and furniture industry and so on. Also, expanding the application field . HPM high -pressure foaming principle
Both Polyol and Isocyanate are stored separately in two tank, and used two rotary axial metering pumps to take material to mixing head, two components injection to a small mixing room at high pressure and flow rate when mixing head started in the hydraulic control, and collide with each other instantly, pass moving transformation that reached to mixing and flow to mold control, after pouring output time that mixing head piston rod forward, all material are pushed to mixing chamber and mixing chamber is cleaned by piston rod, don't left any material. Component passed beside of piston rod return to material tank. If it
don't inject in a long time , low-pressure recalculation switchover unit but two-control component into low recalculation.
Because of equipment' exact calculation, has a small loss and needn't clean and it will be good at environment-protect and reduce the material costs. In the all areas that is to be more and more widely used.
MP 5050 pneumatic driven mold carrier is mainly used for automobile head rest PU foaming and the other soft- foam PU parts production.
The mold can be operated as single-station or equipped asmulti-station with high productivity. The dimension of the carrier is according to the relevant mold which due to the polyurethane.Main Technical Parameter:
. 1 Mold installation board area (mm): 500 × 500,
. 2 Mold installation space height (mm): 350,
. 3 Working stroke (mm):
Opening \closing mold pneumatic cylinder: ~210,
The gasbag: 20,
. 4 Working pressure (Mpa)
Opening \closing mold pneumatic cylinder: 0.6 ~0.7,
The gasbag: 0.30,
. 5 Mold-locking forces (kgf ): ~6, 000,
. 6 Mold-open angle: ~ 85°
. 7 weight (kg): ~ 550
|NO.||Item||Main Technical Parameter|
|1||Mold installation board area||1600*850mm|
|2||Mold installation space height||600mm|
|3||Movable mold-plate stroke||100 mm|
|6||Hydraulic working pressure||8~ 12MPa|