HPM series high-pressure foaming machine is zhangjiagang strength and industrious Machinery Co. Ltd following the international latest high technology and according to word wide the PU industry that independent innovation high technology products .The main parts are import from foreign country, equipment technical and safely performance are reached the word wide advanced capacity. The equipment is widely used automobile industry, insulation industry, air conditioning industry, electric appliance industry and furniture industry and so on. Also, expanding the application field .
HPM high -pressure foaming principle
Both Polyol and Isocyanate are stored separately in two tank, and used two rotary axial metering pumps to take material to mixing head, two components injection to a small mixing room at high pressure and flow rate when mixing head started in the hydraulic control, and collide with each other instantly, pass moving transformation that reached to mixing and flow to mold control, after pouring output time that mixing head piston rod forward, all material are pushed to mixing chamber and mixing chamber is cleaned by piston rod, don't left any material. Component passed beside of piston rod return to material tank. If it don't inject in a long time , low-pressure recalculation switchover unit but two-control component into low recalculation.
Because of equipment' exact calculation, has a small loss and needn't clean and it will be good at environment-protect and reduce the material costs. In the all areas that is to be more and more widely used.
Such key parts as metering pump, high pressure mixing head, PLC etc. Are imported, So its with high performance and reliability.
The HPM series high pressure foaming machine is widely used in allthe polyurethane foaming industries such as refrigeration applications---refrigerator, freezer cabinet, water heater, disinfection cabinet thermal insulation layer and air conditioning sandwich panel.
Main Technical Parameter
* Type: HPM180, HPM100, HPM40, HPM20, HPM10
* Suitable foaming system: Rigid foam, half-rigid foam, flexible foam, integral skin foam.
* Suitable material viscosity at 22 degree Centigrade:
Polyol: Max. 2500 mPa. S,
Isocyanate: Max. 1000 mPa. S,
* Mixing ratio range adjustable 3: 1 ~ 1: 3
* Pouring programming time: 0.50~99.99sec
* Water supply required: Processed running water, flow capacity: 300L/min. Brings R1 " the ball valve;
* The compressed air supply required: 0.7 Mpa, flow capacity: 600NL/min. Dry, oil-less, the dew point at 20 degrees below zero centigrade; With the1.0Mpa pressure relief valve and R3/4" the ball valve;
* Or the nitrogen supply required (if needs): 0.7 Mpa, flow capacity: 600NL/min. With the 1.0Mpa pressure relief valve and R3/4 the ball valve;
* Power supply required: 3× 380V/50Hz± 10% or as customerslocal condition
* Control voltage: AC110V/DC24V;
The Basic Components:
The Metering Unit,
High, Low Pressure Recirculation Switchover Unit,
Components Flow Output Control System,
Hydraulic Control Unit,
High Pressure Mixing Head,
The Components ContainerUnit,
Compressed Air CoolingDryer,
Temperature Control Unit,