HPM series high-pressure foaming machine is zhangjiagang strength and industrious Machinery Co. Ltd following the international latest high technology and according to word wide the PU industry that independent innovation high technology products .The main parts are import from foreign country, equipment technical and safely performance are reached the word wide advanced capacity. The equipment is widely used automobile industry, insulation industry, air conditioning industry, electric appliance industry and furniture industry and so on. Also, expanding the application field .
HPM high -pressure foaming principle
Both Polyol and Isocyanate are stored separately in two tank, and used two rotary axial metering pumps to take material to mixing head, two components injection to a small mixing room at high pressure and flow rate when mixing head started in the hydraulic control, and collide with each other instantly, pass moving transformation that reached to mixing and flow to mold control, after pouring output time that mixing head piston rod forward, all material are pushed to mixing chamber and mixing chamber is cleaned by piston rod, don't left any material. Component passed beside of piston rod return to material tank. If it don't inject in a long time , low-pressure recalculation switchover unit but two-control component into low recalculation.
Because of equipment' exact calculation, has a small loss and needn't clean and it will be good at environment-protect and reduce the material costs. In the all areas that is to be more and more widely used.
PM ST1500 polyol and ISO storage and feeding system
This system is used to storage and feed to the polyol and ISO.
It is suitable in the continuous production pattern, may feed the foaming production line continues with the component material automatically.
Main Technical Parameters:
* Polyol and ISOcontainer unit,
* Effective volume: 1500L;
* Material: Carbon steel,
* Working pressure max. 0.45Mpa;
* With safety valve;
* Agitator with mechanical sealing coupling;
*With pressure switch compressed air decompressor,
* Non-return valve on the filling port;
* Magnetic liquid level meter: Visual level with alarm sensors
* Heat exchanger: Pipe-type heat exchanger installed outside the tank.
* Temperature probe,
*Double walled structure, temperature insulation out of surface of the tank;
* Double screw reciprocating /feeding pump
The flow capacity: 50L/min.,
Main motor power: 5.5kw
* Water supply required: Processed running water, flow capacity: 300L/min. Brings R1 the ball valve;
*The compressed air supply required (if needs): 0.7 Mpa, flow capacity: 600NL/min. With the 1.0Mpa pressure relief valve and R3/4 the ball valve;
* Power supply required: 3 phase; 380V/50Hz plusmn 10% or as customer's local condition
* Control voltage: AC220V/DC24V;