Mh-U Series Hydraulically Mold Carrier 02
|FOB Price:||US $7,300-10,650 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $7,300-10,650/ Set|
|Payment Terms:||L/C, T/T|
- Model NO.: MH7265
- Raw Material: Mixing
- Automation: Automatic
- Certification: CE, ISO9001:2008
- Type;: Polyurethane Foam Machine
- Principle;: High Pressure Impact
- Computerized;: Computerized
- Voltage: 380V Other Power Customizable
- Warranty: 12 Months
- Specification: MH-U
- HS Code: 8477800000
- Type: Polyurethane Foam Machine
- Principle: High-Pressure Air Type
- Computerized: Non-Computerized
- Model No.: Mh7265
- Raw Material;: Polyol and Isocyanate
- Automation;: Automatic
- Certification;: Ce, ISO9001:2008
- Power: 40kw-100kw
- Trademark: zsim
- Origin: Zhangjiagang
HPM series high-pressure foaming machine is zhangjiagang strength and industrious Machinery Co. Ltd following the international latest high technology and according to word wide the PU industry that independent innovation high technology products .The main parts are import from foreign country, equipment technical and safely performance are reached the word wide advanced capacity. The equipment is widely used automobile industry, insulation industry, air conditioning industry, electric appliance industry and furniture industry and so on. Also, expanding the application field .
HPM high -pressure foaming principle
Both Polyol and Isocyanate are stored separately in two tank, and used two rotary axial metering pumps to take material to mixing head, two components injection to a small mixing room at high pressure and flow rate when mixing head started in the hydraulic control, and collide with each other instantly, pass moving transformation that reached to mixing and flow to mold control, after pouring output time that mixing head piston rod forward, all material are pushed to mixing chamber and mixing chamber is cleaned by piston rod, don't left any material. Component passed beside of piston rod return to material tank. If it
don't inject in a long time , low-pressure recalculation switchover unit but two-control component into low recalculation.
Because of equipment' exact calculation, has a small loss and needn't clean and it will be good at environment-protect and reduce the material costs. In the all areas that is to be more and more widely used.
MH-U series hydraulically powered mold carriers is a new type equipment developed based on ZSIMs MH type mold carrier.
It is a new type equipment, to meet the special requirement of automobile inner parts industry, mainly be used for PU-covering on the plastic parts and the other similar parts foaming production.
All the ordinal operation for foaming production (to pen the mold, close the mold, lock the mold, drive the mold-plateup/down, clamping the parts, to do edge-breaking of the parts) is hydraulic/pneumatic drive and by PLC control.
The mold can be operated as single-station or equipped as multi-station system with high productivity.
Main Technical Parameter:
Mold installation board area: 1600*850mm;
Mold installation space height: 600mm;
Movable mold-plate stroke: 100 mm;
MH Series Hydraulic Powered Mold Carriers
It has high performance and reliability.
|Item||Main Technical Parameter|
|1||Mold installation board area||900*800mm|
|2||Mold installation space height||200mm-350mm adjustable|
|3||Mold locking forces||15000kgf|
|4||Mold open angle||~90°|
|5||Jacking cylinder stroke||100~150mm|
|6||Steeple angle of the whole carrier||0~45° adjustable|
|7||Hydraulic working pressure||8~12Mpa|
Hydraulic working pressure: 8~ 12MPa;