6 Stations PU Foaming Line
|FOB Price:||US $377,000-704,000 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $377,000-704,000/ Set|
|Payment Terms:||L/C, T/T|
- Model NO.: HPM20/10 MH7065
- Raw Material: Mixing
- Automation: Automatic
- Certification: CE, ISO9001:2008
- Type;: Polyurethane Foam Machine
- Principle;: High Pressure Impact
- Computerized;: Computerized
- Voltage: 380V Other Power Customizable
- Warranty: 12 Months
- Origin: Zhangjiagang
- Type: Polyurethane Foam Machine
- Principle: High-Pressure Air Type
- Computerized: Computerized
- Model No.: Hpm20/10 Mh7065
- Raw Material;: Polyol and Isocyanate
- Automation;: Automatic
- Certification;: Ce, ISO9001:2008
- Power: 40kw-100kw
- Trademark: ZSIM
- HS Code: 8477800000
HPM high -pressure foaming principle
Both Polyol and Isocyanate are stored separately in two tank, and used two rotary axial metering pumps to take material to mixing head, two components injection to a small mixing room at high pressure and flow rate when mixing head started in the hydraulic control, and collide with each other instantly, pass moving transformation that reached to mixing and flow to mold control, after pouring output time that mixing head piston rod forward, all material are pushed to mixing chamber and mixing chamber is cleaned by piston rod, don't left any material. Component passed beside of piston rod return to material tank. If it don't inject in a long time , low-pressure recalculation switchover unit but two-control component into low recalculation.
Because of equipment' exact calculation, has a small loss and needn't clean and it will be good at environment-protect and reduce the material costs. In the all areas that is to be more and more widely used.
This system consists of 1 set of HPM20/10 6 mixing head high pressure foaming machine, 3 sets of colorant unit, 6 sets of MH70 65 hydraulic driven
Mold carriers unit, 2 sets of hydraulic unit, 1 set of exhaust system, 1 set of safety protection system and electrical contro l system etc.
The nucleation technology is used for the high pressure foaming machine. To implement closed-loop control component flow, gre atly improving the Quality of steering wheel PU foaming.
The control system adopts Profibus-2DP network control strategy, to make a high degree of automation; The mold carrier unit is separately installed in
The isolation room. And install the infrared light curtain. The exhaust system and the dust recovery device be installed for t he system, to made Production site more environmentally friendly, more safety.
|1||Suitable foaming system||flexible foam, integral skin foam|
|2||Suitable material viscosity||22ºC|
|3||Mixing ratio range adjustable||3:1~1:1|
|5||Pouring programming time||0.50~99.99sec|
|6||The compressed air supply required||0.7Mpa|
|7||Power supply required||3×380V/50Hz±10%|
|8||The nitrogen supply required (if needs)||0.7Mpa|