- Model NO.: ROL-32-100/80, RLM-24-180100,RVF-7,SLFL-10-200100;
- Raw Material: Polyol and Isocyanate, PU
- Automation: Automatic
- Certification: CE, ISO9001:2008
- Type;: Polyurethane Foam Machine
- Principle;: High Pressure Impact
- Computerized;: Computerized
- Voltage: 380V Other Power Customizable
- Warranty: 12 Months
- Origin: Zhangjiagang
- Type: Polyurethane Foam Machine
- Principle: High-Pressure Air Type
- Computerized: Computerized
- Model No.: Rol-32-100/80, Rlm-24-180100,Rvf-7,Slfl-10-200100;
- Raw Material;: Polyol and Isocyanate
- Automation;: Automatic
- Certification;: Ce, ISO9001:2008
- Power: 40kw-100kw
- Trademark: zsim
- HS Code: 8477800000
HPM high -pressure foaming principle
Both Polyol and Isocyanate are stored separately in two tank, and used two rotary axial metering pumps to take material to mixing head, two components injection to a small mixing room at high pressure and flow rate when mixing head started in the hydraulic control, and collide with each other instantly, pass moving transformation that reached to mixing and flow to mold control, after pouring output time that mixing head piston rod forward, all material are pushed to mixing chamber and mixing chamber is cleaned by piston rod, don't left any material. Component passed beside of piston rod return to material tank. If it don't inject in a long time , low-pressure recalculation switchover unit but two-control component into low recalculation.
Because of equipment' exact calculation, has a small loss and needn't clean and it will be good at environment-protect and reduce the material costs. In the all areas that is to be more and more widely used.
Motor-reducer-chain drive system is used; The rotational speed of foaming line is regulated by the frequency converter.
ROL-32-100/80 the Refrigerator Door PU Foaming Line
32 Stations Oval Continuous Foaming Line is designed for refrigerator door PUR foaming production. The line is installed as oval collocation on level ground.
Motor-reducer-chain drive system is used; The rotational speed of foaming line is regulated by the frequency converter. The foaming line has the structure compact, the operation simple, the transmission smoothly, the production efficiency higher characteristic, widely applies in the refrigerator door, electric water heater thermal barrier PU foaming.
Air heating system with heat exchanger
Equipped with Fresh air generating unit and ventilation system, ensure the safety running of production.
Main Technical Parameters:
Mold installation board area (mm): 1000 * 800
Production tact: 15~ 30 sec.,
Time of per circle for mold conveying on the line: 8~16 min.,
Running mode: Continuous running or intermission running,
Main motor power: 4kw,
Heating oven temperature: ~ 55 degree Centigrade,
Heating way: The steam heating, the steam source provides by the customer;
Power supply required: Three phase 380V/50Hz plusmn10% or as customer's local condition,
Control voltage: AC 220V/DC24V,
Total power: ~ 27, 000mm ( length )* 7, 000mm ( width)